Wheel Offset Disk Harrow
For use with tractors in the 375 – 600hp range
Features:
- For deep plowing, plowing in heavy trash, mixing and aerating.
- Heavy duty proven design with rugged construction welded for maximum strength and rigidity.
- Adjustable disk blade scrapers.
- Equipped with Timken dual tapered roller bearings.
- High gang carrier design to prevent trash build up and clogging.
- Heavy duty torsion tube for distributing the torque generated by the front right gang.
- Hydraulic tongue leveler with nitrogen accumulator.
- Up to 1088lbs (494kg) of weight per disk blade depending on model.
- Standard 13” (330mm) depth of penetration with 36” (914mm) diameter disk blades.
- Optional 15” (381mm) depth of penetration with 42” (1.07m) diameter disk blades.
Specifications:
Series TRCW Wheel Offset Disk Harrow
20” (508mm) disk spacing; 2-1/2” (64mm) round axles; Equipped with Timken dual tapered roller bearings
| Model Number | Width of Cut ft/in (m) | Number of Disks | Suggested Engine Horsepower | Weight Per Disk lbs (kg) | Net Weight lbs (kg) |
| TRCW‐20 | 16’‐0” (4.9) | 20 | 375 – 450 | 1143 (518) | 24,400 (11,068) |
| TRCW‐24 | 19’‐6” (5.9) | 24 | 450 – 600 | 1068 (484) | 26,810 (12,161) |
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE
S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. Two rear tractor hydraulic circuits required for harrow operation.
Standard Equipment:
- 36” (914mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.
- Hydraulic tongue leveler with nitrogen accumulator.
- Adjustable disk blade scrapers.
- Heat treated alloy steel gang axles.
- Heavy duty fabricated steel spacer spools.
- Heavy duty bearing wear plates.
- New industrial tires – 4 each TRCW-20 and TRCW-24: 21.5 x 16.1 – 14 ply.
- Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
- Drawbar jack stand and safety chain.
Optional Equipment:
- 42” (1.07m) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.
- Cylinder rod stops.
- Light group.
- Oil Bath Bearings