Heavy Duty Ejector Scraper
For use with tractors in the 360 – 600hp range
Features:
- Rugged 18 yd³ (13.8m³) scraper with heavy duty plate frame construction for maximum strength and rigidity.
- Cost effective way to move material when haul distance is 1000’ (305m) or less.
- Rear cross member made from 10” (254mm) x 10” (254mm) x 3/4” (20mm) thick fabricated box section steel.
- Spreader bar made from 14” (357mm) x 14” (357mm) x 3/4” (20mm) thick fabricated box section steel.
- Tandem hitch capability.
- “Slip-in” bolted spindle and hub assembly.
- Highest quality hydraulic cylinders have ball joints on both base and rod ends for long life.
- Push block protects scraper rear when push loading is necessary in tough loading conditions.
- Three piece cutting edge with extended center router blade has same cutting edge and router bit as Rome R67H scraper.
- Bottom rollers on ejector assembly with ejector top rollers and guide rails on bowl sides to support ejector.
Specifications:
Series RP-180HDE Heavy Duty Ejector Scraper
| Width of Cut | 10’-0” (3.1m) | |
| Struck Capacity | 13yd³ (9.9m³) | |
| Heaped Capacity | 18yd³ (13.8m³) | |
| Payload Heaped Capacity | 50,220 (22,779kg) | |
| Overall Dimensions | Length | 29’-6” (9.0m) |
| Width | 11’-2” (3.4m) | |
| Height | 7’-6” (2.3m) | |
| Bowl Dimensions | Height | 4’-2” (1.3m) |
| Depth of Spread | 20” (0.5m) | |
| Depth of Cut | 5” (127mm) | |
| Width Outside to Outside of Tires | 10’-6” (3.2m) | |
| Transport Clearance | 20” (508mm) | |
| Shipping Weight | 29,000 (13154kg) | |
| Scraper Weight Distribution | Tongue | 29% |
| Wheels: | 71% | |
| Number of Tires | 2 | |
| Tire Size | 29.5 x 25 | |
| Floor Thickness | 3-1/2” (89mm) | |
| Reversible Cutting Edges | Yes | |
| Tandem Kit Available | Yes | |
| Loading Type | Direct | |
| Laser/GPS Adaptable | Yes | |
| Hitch Type | Yoke | |
| Special Tractor Drawbar | Required | |
| Suggested Engine Horsepower | 350-500 | |
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to scraper.
NOTE: This scraper requires hydraulic control. Two rear tractor hydraulic circuits required for scraper operation.