Wheel Offset Disk Harrow
For use with tractors in the 304 – 542hp range
Features:
- Both rigid and folding models are designed to give excellent uniform tillage in all stubble plowing situations.
- Main frame and gang carriers constructed of high strength tubular steel that is welded for maximum strength and durability.
- Hydraulically controlled transport assembly with cylinder transport locks to pin wheels in raised position to safeguard implement from accidentally falling during transport.
- Transport position allows approximately 12” (305mm) ground clearance.
- Adjustable gang angles of 18°, 20°, and 22° for both front and rear gangs.
- Equipped with Timken dual tapered roller bearings.
- Up to 462lbs (210kg) of weight per disk blade depending on model with an average of 444lbs (201kg).
- Up to 11” (279mm) maximum depth of penetration with standard 32” (813mm) diameter disk blades.
Specifications:
Series 4850 Wheel Offset Disk Harrow
12” (305mm) disk spacing; 2-1/8” (54mm) round axles; Equipped with Timken dual tapered roller bearings
| Model Number | Width of Cut ft/in (m) | Transport Width ft/in (m) | Number of Disks | Suggested Engine Horsepower | Weight Per Disk lbs (kg) | Net Weight lbs (kg) |
| 4850-35 | 16’-6” (5.0) | 17’-6” (5.3) | 35 | 304 – 359 | 500 (227) | 17,510 (7942) |
| 4850-49-WF | 24’-6” (7.5) | 13’-8” (4.2) | 49 | 422 – 477 | 425 (193) | 23,165 (10507) |
| 4850-53-WF | 26’-6” (8.1) | 15’-6” (4.7) | 53 | 487 – 542 | 462 (210) | 26,600 (12066) |
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for model 4850-35. Two rear tractor hydraulic circuits required for models 4850-49-WF and 4850-53-WF
Standard Equipment:
- 32” (813mm) diameter x 3/8” (10mm) thick, cutout (notched) shallow concavity disk blades.
- Heat treated alloy steel gang axles.
- Heavy duty fabricated steel spacer spools.
- Bearing wear plates.
- Furrow filler disk group.
- Adjustable disk blade scrapers.
- Wheel hubs with 2 tapered roller bearings on each hub that are dust and moisture protected.
- New industrial tires – 4 each. 4850-35 and 4850-49-WF: 12.5L x 15. 4850-53-WF: 16.5L x 16.1.
- Hardened pins and bushings.
- Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
- Cylinder rod stops.
- Drawbar jack stand and safety chain.
Optional Equipment:
- 32” (813mm) diameter x 3/8” (10mm) thick; dura-faced cutout (notched) shallow concavity disk blades.
- Heavy duty bearing wear plates.
- Rear hitch assembly.
- Rear hitch hydraulic group.