Flex Wing Tandem Disk Harrow
For use with tractors in the 200 – 400hp range
Features:
- Mainframe, wings, and gang carriers constructed of tough high strength tubular steel for maximum strength and durability.
- Weld on gang standards for optimum strength and rigidity assures precise gang alignment.
- Hydraulically controlled transport assembly and wing fold up.
- Wing fold mechanism allows wings to float up and down 5° when disk plowing.
- Equipped with oil bath dual tapered roller bearings.
- Spring loaded self-leveling hitch with front to rear leveling turnbuckle gives precise leveling control.
- Fixed gang angle of 18° for both front and rear gangs.
- Adjustable height on hitch clevis allows for straight line pull and helps prevent gouging of the front gangs.
- 9” (229mm) ground clearance with 24” (610mm) diameter disk blades.
- 185lbs (84kg) of harrow weight per disk blade.
Specifications:
Series 185 Flex Wing Tandem Disk Harrow
9” (229mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken oil bath dual tapered roller bearings.
| Model Number | Number of Disks | Number of Bearings | Width of Cut ft/in (m) | Transport Width ft/in (m) | Transport Height ft/in (m) | Suggested Engine Hp | Net Weight lbs (kg) |
| 185-966 | 66 | 16 | 25’-2” (7.7) | 15’-6” (4.7) | 9’-9” (3.0) | 200 – 285 | 14,210 (6446) |
| 185-978 | 78 | 24 | 29’-6” (9.0) | 15’-6” (4.7) | 12’-6” (3.8) | 250 – 350 | 16,430 (7453) |
| 185-982 | 82 | 24 | 31’-0” (9.5) | 15’-6” (4.7) | 13’-0” (4.0) | 265 – 370 | 17,170 (7788) |
| 185-986 | 86 | 24 | 32’-6” (9.9) | 15’-6” (4.7) | 13’-6” (4.1) | 290 – 400 | 17,910 (8124) |
| 185-990 | 90 | 24 | 34’-0” (10.4) | 15’-6” (4.7) | 14’-6” (4.4) | 310 – 410 | 18,650 (8459) |
| 185-994 | 84 | 24 | 35’-6” (10.8) | 15’-6” (4.7) | 15’-0” (4.6) | 400 + | 19,390 (8795) |
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. Two rear tractor hydraulic circuits required for harrow operation.
Standard Equipment:
- 24” (610mm) diameter x 1/4” (6mm) thick, smooth (round) shallow concavity disk blades for longer life.
- Tapered gang assemblies.
- Disk type balk buster.
- Adjustable disk blade scrapers.
- Heat treated alloy steel gang axles.
- Heavy duty cast steel spacer spools.
- Bearing wear plates.
- Cylinder rod stops for positive depth control adjustment.
- Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
- Wheel hubs have 8-bolt, 6000lb (2722kg) slip in spindles on center frame and wings with two tapered roller bearings on each hub that are dust and moisture protected.
- Four dual sets of 12Lx15 farm highway service tires on center frames and wings for maximum floatation and tire capacity.
- Transport locks pin wheels in raised position for transport.
- Two heavy duty gang wrenches.
- Drawbar jack stand.
Optional Equipment:
- 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) front and smooth (round) rear shallow concavity disk blades.
- 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) front and rear shallow concavity disk blades.
- Rear hitch assembly.
- Rear hydraulic group.
- Extra heavy duty bearing wear plates with 1/4” (6mm) hard plate overlay.
- Light group.