PG Series

Pull Grader

For use with tractors in the 70 – 200hp plus range


Features:

  • Used to economically dress road shoulders; construct and maintain ditches, haul and field roads, terraces, and levees.
  • Laser adaptable to allow contractors to finish grade to exact specifications and farmers to precision level fields.
  • ROME sloper blade, heavy duty 3/4” (19mm) thick high strength steel with replaceable cutting edges and end bits.
  • Operator has hydraulic control of blade angle, blade tilt, and transport wheels from the tractor seat.
  • Hydraulically operated 45° blade angle front to rear or left to right, 18° blade tilt up and down.
  • Walking beam transport group with dual wheels.
  • Weight box allows extra weight to be added if desired.

Specifications:

Series PG Pulled Grader

Model Number Overall Dimensions Blade Length ft/in (m) Ground Clearance in (mm) Suggested Engine Horsepower Net Weight lbs (kg)
Length ft/in (m) Width ft/in (m) Height ft/in (m)
PG-10 17’-7” (5.4) 8’-8” (2.6) 3’-7” (1.1) 10’-0” (3.1) 18” (457) 70 – 130 3890 (1764)
PG-12 17’-7” (5.4) 8’-8” (2.6) 3’-7” (1.1) 12’-0” (3.7) 18” (457) 90 – 150 4160 (1887)
PG-16 21’-7” (6.6) 11’-8” (3.6) 3’-7” (1.1) 16’-0” (4.9) 18” (457) 140 – 200 4336 (1967)

* Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to implement. Width measured with the blade at 45° angle. Height measured with blade resting on ground. Blade ground clearance depends on blade angle and drawbar height.

NOTE: This implement requires hydraulic control. Three rear tractor hydraulic circuits required for implement operation. The right and left blade swing circuit is equipped with a crossover relief valve factory preset at 1300 psi ± 50psi.

Standard Equipment:

  • Weight Box – PG-10 & PG-12: up to 3000lbs (1361kg). PG-16: up to 4000lbs (1814kg).
  • Hubs with slip in bolt on spindles – PG-10 & PG-12: six bolt. PG-16: eight bolt.
  • Offset walking beam transport unit.
  • Crossover relief valve.
  • Transport light group.

Optional Equipment:

  • Box scraper group.
  • Laser mast assembly.

Download PDF