Pivot Dump Carry-All Scraper
For use with tractors in the 125 - 200 hp range
Features:
- ROME pivot dump, carry-all scrapers are the perfect solution to a wide range of material moving challenges and are ideally suited for moving bulk material at low cost and fast turnaround.
- Designed for use in agriculture, land leveling and; general, road, and levee construction; site preparation; pond building; cutting and maintaining irrigation ditches.
- Ruggedly built with heavy duty plate frame construction welded for maximum strength and rigidity.
- Designed to allow maximum dump clearance in order to assure maximum control of discharged material.
- One piece bowl reduces load compaction and greatly increases efficiency.
- Tandem hitch capability.
- All wheel hubs are fully independent.
- Hydraulics adapt for laser/GPS control.
- Highest quality hydraulic cylinders have ball joints on both base and rod ends for long life.
Specifications:
Series RP-90CS Pivot Dump Carry-All Scraper
| Width of Cut: | 7’‐0” (2.1m) | |
| Struck Capacity: | 7yd³ (5.4m³) | |
| Heaped Capacity: | 9yd³ (6.9m³) | |
| Overall Dimensions: | Length | 21’‐3” (6.5m) |
| Width | 8’‐7” (2.6m) | |
| Height | 5’‐10” (1.8m) | |
| Bowl Dimensions | Height | 3’‐9” (1.3m) |
| Width | 7’ (2.1m) | |
| Width Outside to Outside of Tires: | 8’‐3” (2.5m) | |
| Transport Clearance: | 13” (330mm) | |
| Shipping Weight: | 9,800 (4,445 kg) | |
| Scraper Weight Distribution: | Tongue: | 21% |
| Wheels: | 79% | |
| Number of Tires: | 4 | |
| Tire Size: | 16.5 x 16.1 | |
| Floor Thickness: | 2” | |
| Reversible Cutting Edges: | Yes | |
| Tandem Kit Available: | Yes | |
| Loading Type: | Direct | |
| Laser/GPS Adaptable: | Yes | |
| Hitch Type: | Yoke | |
| Special Tractor Drawbar: | Required | |
| Suggested Engine Horsepower: | 125 – 200 | |
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to scraper.
NOTE: This scraper requires hydraulic control. Two rear tractor hydraulic circuits required for scraper operation.