Pivot Dump Carry-All Scraper
For use with tractors in the 225 - 400hp range
Features:
- The ROME towed pivot dump, roll-out scrapers are the perfect solution to a wide range of material moving challenges and are ideally suited for moving bulk material at low cost and fast turnaround.
- Four bowl sizes with two tire arrangements are available to allow these machines to work in both high compaction and extremely soft soil environments.
- Designed for use in agriculture; general, road, and levee construction; site preparation; pond building; cutting and maintaining irrigation ditches; and land leveling.
- Ruggedly built with heavy duty plate frame construction electrically welded for maximum strength and rigidity.
- Designed to allow maximum dump clearance in order to assure maximum control of discharged material.
- One piece bowl reduces load compaction and greatly increases efficiency.
- Bolt on frost bit/stinger standard.
- All wheel hubs are fully independent.
- Tandem hitch capability with hydraulic supply kit and auxiliary kit standard.
- Bulkhead fittings protect hydraulic hookups.
- Available with 20.5, 23.5, or 26.5 tires.
Specifications:
Series RP Pivot Dump Carrry-All Scraper
| Model Number | Capacity | Width of Cut ft/in (m) | Overall Length ft/in (m) | Overall Width ft/in (m) | Number of Tires & Ply | Suggested Engine Hp | Net Weight lbs (kg) | ||
| Heaped yd³ (m³) |
Struck yd³ (m³) |
Single | Tandem | ||||||
| RP-150CS Contractors Special |
15 (11.5) | 11 (8.4) | 10’-0” (3.1) | 25’-0” (7.6) | 11’-9” (3.6) | (4) 20.5x20 20 PR | 225 | 300 | 19,150 (8686) |
| RP-150LGP Low Ground Pressure |
15 (11.5) | 11 (8.4) | 10’-0” (3.1) | 25’-7” (7.8) | 11’-9” (3.6) | (2) 66x43 25 NHS | 225 | n/a | 18,675 (8471) |
| RP-175CS Contractors Special |
17.5 (13.4) | 13.5 (10.3) | 10’-0” (3.1) | 25’-0” (7.6) | 11’-9” (3.6) | (4) 20.5x25 20 PR | 300 | 450 | 19,575 (8879) |
| RP-175LGP Low Ground Pressure |
17.5 (13.4) | 13.5 (10.3) | 10’-0” (3.1) | 25’-7” (7.8) | 11’-9” (3.6) | (2) 66x43 25 NHS | 300 | n/a | 19,105 (8666) |
| RP-190CS Contractors Special |
19 (14.5) | 15 (11.5) | 12’-0” (3.7) | 28’-0” (8.5) | 13’-9” (4.1) | (4) 20.5x25 20 PR | 325 | 450 | 24,150 (10954) |
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to scraper.
NOTE: This scraper requires hydraulic control. Two rear tractor hydraulic circuits required for scraper operation.