Flex Wing Tandem Disk Harrow
For use with tractors in the 268 – 377hp range
Features:
- Uniquely designed harrow is available in three wing fold models. Harrows are ideally suited to give excellent uniform tillage results in all plowing applications.
- Mainframe, wings, and gang carriers constructed of tough high strength tubular steel for maximum strength and durability.
- Hydraulically controlled transport assembly with cylinder transport locks to pin wheels in raised position to safeguard implement from accidentally falling during transport.
- 9” (229mm) ground clearance with standard 28” (711mm) diameter disk blades.
- Fixed gang angles of 20° for both front and rear gangs.
- Tapered gang assemblies.
- Hydraulic down pressure kit to keep wings rigid.
- Up to 9” (229mm) maximum depth of penetration with standard 28” (711mm) diameter disk blades.
- Equipped with Timken dual tapered oil bath roller bearings.
- Standard bearing wear plates help protect the bearing housing from the wear caused by abrasive soils, extending their service life and decreasing cost.
Specifications:
Series 265 Flex Wing Tandem Disk Harrow
11” (279mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken dual tapered oil bath roller bearings
| Model Number | Number of Disks | Number of Bearings | Width of Cut ft/in (m) | Transport Width ft/in (m) | Transport Height ft/in (m) | Suggested Engine Hp | Weight Per Disk lbs (kg) | Net Weight lbs (kg) |
| 265-56 | 56 | 20 | 23’-6” (7.2) | 13’-1” (4.0) | 16’-4” (5.0) | 268 – 302 | 272 (123) | 15,252 (6918) |
| 265-60 | 60 | 20 | 25’-0” (7.6) | 14’-0” (4.3) | 16’-4” (5.0) | 290 – 324 | 272 (123) | 16,368 (7424) |
| 265-72 | 72 | 24 | 29’-5” (9.0) | 15’-9” (4.8) | 16’-4” (5.0) | 343 – 377 | 273 (124) | 19,120 (8673) |
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. Two rear tractor hydraulic circuits required for harrow operation.
Standard Equipment:
- 28” (711mm) diameter x 5/16” (8mm) thick, cutout (notched) shallow concavity disk blades.
- Oil bath lubricated disk type balk buster.
- Tapered gang assemblies.
- Heat treated alloy steel gang axles.
- Heavy duty fabricated steel spacers.
- Adjustable disk blade scrapers.
- Heavy duty bearing wear plates.
- Eight 12L x 15 farm highway service tires for transporting, plowing, and turning.
- Wheel hubs with two tapered roller bearings on each hub that are dust and moisture protected.
- Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
- Rod stops for depth control adjustment.
- Hardened pins and bushings on all pivot points.
- Drawbar jack stand and safety chain.
Optional Equipment:
- 28” (711mm) diameter x 5/16” (8mm) thick, cutout (notched) front and smooth (round) rear shallow concavity disk blades.
- 28” (711mm) diameter x 5/16” (8mm) thick, round (smooth) front and rear shallow concavity disk blades.
- 28” (711mm) diameter x 5/16” (8mm) dura-faced disk blades available in all configurations.
- Rear hitch assembly.
- Rear hydraulic group.
- Extra heavy duty bearing wear plates with 1/4” (6mm) hard plate overlay.
- Light group.