Wheel Offset Disk Harrow
For use with tractors in the 240 – 400hp range
Features:
For deep plowing, plowing in heavy trash, mixing and aerating.
Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.
Adjustable disk blade scrapers.
Equipped with Timken dual tapered roller bearings.
High gang carrier design to prevent trash build up and clogging.
Up to 1092lbs (497kg) of weight per disk blade depending on model.
Standard 13” (330mm) depth of penetration with 36” (914mm) diameter disk blades.
Optional 15” (381mm) depth of penetration with 42” (1.07m) diameter disk blades.
Specifications:
Series TRCW Wheel Offset Disk Harrow
20” (508mm) disk spacing; 2-1/2” (64mm) round axles; Equipped with Timken dual tapered roller bearings.
| Model Number | Width of Cut ft/in (m) | Number of Disks | Suggested Engine Horsepower | Weight Per Disk lbs (kg) | Net Weight lbs (kg) |
| TRCW‐12 | 9’‐0” (2.7) | 12 | 240 – 325 | 1092 (497) | 13,105 (5957) |
| TRCW‐16 | 12’‐6” (3.8) | 16 | 300 – 400 | 1009 (459) | 16,137 (7335) |
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation.
Standard Equipment:
- 36” (914mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.
- Adjustable disk blade scrapers.
- Heat treated alloy steel gang axles.
- Heavy duty fabricated steel spacer spools.
- Heavy duty bearing wear plates.
- New industrial tires – 2 each TRCW-12 and TRCW-16: 15 x 22.5 – 16 ply.
- Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
- Drawbar jack stand and safety chain.
Optional Equipment:
- 42” (1.07m) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.
- Cylinder rod stops
- Oil Bath Bearings