Woods Special Wheel Offset Disk Harrow
For use with tractors in the 214 – 286hp range
Features:
- TRW-S has special reinforcement for woods site preparation and other severe applications.
- Includes strengthened gang carriers, drawbar, offset bar, stabilizer, latch, bearing standards and bearing brackets.
- High gang carrier design to prevent trash build up and clogging.
- Adjustable disk blade scrapers.
- Equipped with Timken dual tapered roller bearings.
- Up to 810lbs (367kg) of weight per disk blade depending on model with an average of 722lbs (328kg).
- Up to 11” (279mm) maximum depth of penetration with standard 32” (813mm) diameter disk blades.
Specifications:
Series TRW-S & TRW Woods Special Wheel Offset Disk Harrow
14” (356mm) disk spacing; 2-1/2” (64mm) round axles; Equipped with Timken dual tapered roller bearings
| Model Number | Width of Cut ft/in (m) | Number of Disks | Suggested Engine Horsepower | Weight Per Disk lbs (kg) | Net Weight lbs (kg) |
| TRW‐16S | 9’‐0” (2.7) | 16 | 214 – 239 | 810 (367) | 12,963 (5880) |
| TRW‐20S | 11’‐0” (3.4) | 20 | 231 – 257 | 703 (319) | 14,068 (6381) |
| TRW‐24 | 13’‐6” (4.1) | 24 | 261 – 286 | 653 (296) | 15,672 (7109) |
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE
S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation.
Standard Equipment:
- 32” (813mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.
- Adjustable disk blade scrapers.
- Heat treated alloy steel gang axles.
- Heavy duty cast steel spacer spools.
- Heavy duty bearing wear plates.
- New industrial tires – 2 each. All models:15 x 22.5 – 16 ply.
- Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
- Drawbar jack stand and safety chain.
Optional Equipment:
- Cylinder rod stops