Wheel Offset Disk Harrow
For use with tractors in the 150 – 325hp range
Features:
- For deep plowing, plowing in heavy trash, mixing and aerating.
- Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.
- Combines thorough mixing and aerating with easy maneuverability and transportability.
- Fabricated spacers are manufactured with A53 steel for high compression and tensile strength. This gives the spacers approximately double the durability of cast spacers.
- Heavy duty moldboard style adjustable disk blade scrapers.
- Equipped with greaseable Timken dual tapered roller bearings.
- High gang carrier design to prevent trash build up and clogging.
- Up to 737lbs (335kg) of weight per disk blade depending on model with an average of 681lbs (309kg).
- Full range of adjustments to control depth of penetration – up to 13” (330mm) with 36” (914mm) diameter disk blades.
Specifications:
Series TACWR Wheel Offset Disk Harrow
17-3/4” (450mm) disk spacing; 2-1/2” (64mm) round axles; Equipped with Timken dual tapered roller bearings
| Model Number | Width of Cut ft/in (m) | Number of Disks | Suggested Engine Horsepower | Weight Per Disk lbs (kg) | Net Weight lbs (kg) |
| TACWR-12 | 8’-0” (2.4) | 12 | 150 – 225 | 715 (324) | 8,575 (3890) |
| TACWR-16 | 11’-0” (3.4) | 16 | 200 – 275 | 709 (322) | 11,339 (5143) |
| TACWR-20 | 14’-0” (4.3) | 20 | 250 – 325 | 681 (309) | 13,621 (6178) |
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation.
Standard Equipment:
- 36” (914mm) diameter, 1/2” (13mm) thick, cutout deep concavity disk blades.
- Fabricated spacers made from A53 steel.
- Heavy duty moldboard style adjustable disk blade scrapers.
- Heavy duty bearing wear plates.
- New industrial tires – 2 each. TACWR-12 and TACWR-16: 12.5L x 15. TACWR-20: 16.5L x 16.1.
- Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
- Drawbar jack stand and safety chain.
Optional Equipment:
- Cylinder rod stops for positive depth control adjustment