Wheel Offset Disk Harrow
For use with tractors in the 95 – 209hp range
Features:
- For deep plowing, plowing in heavy trash, mixing and aerating.
- Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.
- High gang carrier design to prevent trash build up and clogging.
- Combines thorough mixing and aerating with easy maneuverability and transportability.
- Up to 625lbs (284kg) of weight per disk blade depending on model with an average of 582lbs (264kg).
- Up to 10” (254mm) maximum depth of penetration with standard 32” (813mm) diameter disk blades.
- Equipped with Timken dual tapered roller bearings.
- Adjustable disk blade scrapers.
- Dual purpose transport unit for transportability and penetration control.
Specifications:
Series TACW Wheel Offset Disk Harrow
17-3/4” (450mm) disk spacing; 2-1/8” (54mm) round axles; Equipped with Timken dual tapered roller bearings
| Model Number | Width of Cut ft/in (m) | Number of Disks | Suggested Engine Horsepower | Weight Per Disk lbs (kg) | Net Weight lbs (kg) |
| TACW-10 | 6’-6” (2.0) | 10 | 95 – 120 | 635 (288) | 6350 (2880) |
| TACW-12 | 8’-0” (2.4) | 12 | 105 – 130 | 571 (259) | 6850 (3107) |
| TACW-16 | 11’-0” (3.4) | 16 | 168 – 193 | 612 (278) | 9792 (4442) |
| TACW-20 | 14’-0” (4.3) | 20 | 184 – 209 | 552 (250) | 10,659 (4835) |
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation.
Standard Equipment:
- 32” (813mm) diameter x 3/8” (10mm) thick, cutout (notched) deep concavity disk blades.
- Adjustable disk blade scrapers.
- Heat treated alloy steel gang axles.
- Heavy duty cast steel spacer spools.
- Heavy duty bearing wear plates.
- New industrial tires – 2 each. TACW-10 thru TACW-16: 12.5L x 15 – 12 ply. TACW-20: 16.5L x 16.1 – 10 ply.
- Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
- Two heavy duty gang wrenches.
- Drawbar jack stand and safety chain.
Optional Equipment:
- Cylinder rod stops for positive depth control adjustment