Wheel Offset Disk Harrow
For use with tractors in the 84 – 193hp range
Features:
- Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.
- Dual purpose transport unit for transportability and penetration control.
- Combines ease of maneuverability with high strength for the most adverse conditions.
- High gang carrier design to prevent trash build up and clogging.
- Greaseable dual tapered roller bearings.
- Levels, cuts, and mixes to full working depth.
- Up to 384lbs (174kg) of weight per disk blade depending on model with an average of 366lbs (166kg).
- Full range of adjustments to control depth of penetration – up to 9” (229mm) with standard 28” (711mm) diameter disk blades.
Specifications:
Series TAW Wheel Offset Disk Harrow
12” (305mm) disk spacing; 2-1/8” (54mm) round axles; Equipped with Timken dual tapered roller bearings
| Model Number | Width of Cut ft/in (m) | Number of Disks | Suggested Engine Horsepower | Weight Per Disk lbs (kg) | Net Weight lbs (kg) |
| TAW–16 | 7’-6” (2.3) | 16 | 84 – 105 | 431 (195) | 6,900 (3130) |
| TAW-20S | 9’-6” (2.9) | 20 | 98 – 120 | 396 (180) | 7,925 (3595) |
| TAW-24 | 11’-6” (3.5) | 24 | 117 – 138 | 383 (174) | 9,200 (4173) |
| TAW-28 | 13’-6” (4.1) | 28 | 155 – 177 | 413 (187) | 11,550 (5239) |
| TAW-32 | 15’-6” (4.7) | 32 | 171 – 193 | 404 (183) | 12,925 (5863) |
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE
S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation.
Standard Equipment:
- 28” (711mm) diameter, 3/8” (10mm) thick, cutout (notched) deep concavity disk blades.
- Adjustable disk blade scrapers.
- Heavy duty bearing wear plates.
- New industrial tires – 2 each. TAW-16 thru TAW-24: 12.5L x 15. TAW-28 and TAW-32: 21.5L x 16.1.
- Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
- Drawbar jack stand and safety chain.
Optional Equipment:
- 30” (762mm) diameter x 3/8” (10mm) thick, cutout (notched) deep concavity disk blades.
- 30” (762mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.
- 32” (813mm) diameter x 3/8” (10mm) thick, cutout (notched) deep concavity disk blades.
- Cylinder rod stops.