TRH-S Series

Woods Special Hinge Offset Disk Harrow

For use with tractors in the 144 – 298hp range

FEATURES

  • For deep plowing, and plowing after clearing.
  • Special reinforcement for woods site preparation and other severe applications. Includes strengthened gang carriers, drawbar, offset bar, stabilizer, latch, bearing standards and bearing brackets.
  • High gang carrier design to prevent trash build up and clogging.
  • Adjustable disk blade scrapers.
  • Equipped with Timken dual tapered roller bearings.
  • Up to 647lbs (294kg) of weight per disk blade depending on model with an average of 608lbs (276kg).
  • Up to 11” (279mm) maximum depth of penetration with standard 32” (813mm) diameter disk blades.
TRH-SSeries.jpg
TRH-SSeries.jpg

Specifications

Series TRH-S Woods Special Hinge Offset Disk Harrow

14” (356mm) disk spacing; 2-1/2” (64mm) round axles; Equipped with Timken dual tapered roller bearings.

Model Number Width of Cut ft/in (m) Number of Disks Suggested Engine Horsepower Weight Per Disk lbs (kg) Net Weight lbs (kg)
TRH-14S 7’-6” (2.3) 14 144 – 169 645 (293) 9024 (4093)
TRH-16S 9’-0” (2.7) 16 165 – 190 647 (294) 10,344 (4692)
TRH-20S 11’-0” (3.4) 20 183 – 208 569 (258) 11,370 (5157)
TRH-24S 13’-6” (4.1) 24 229 – 253 582 (264) 13,975 (6339)
TRH-28S 15’-6” (4.7) 28 272 – 298 595 (270) 16,657 (7556)

*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation.

Standard Equipment

  • 32” (813mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.
  • Mechanical angling control.
  • Adjustable disk blade scrapers.
  • Heat treated alloy steel gang axles.
  • Heavy duty cast steel spacer spools.
  • Heavy duty bearing wear plates.
  • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
  • Drawbar jack stand and safety chain.

Optional Equipment

  • Cylinder rod stops.
  • Weight box.