TRCW-12 & 16 Series

Wheel Offset Disk Harrow

For use with tractors in the 240 – 400hp range


  • For deep plowing, plowing in heavy trash, mixing and aerating.
  • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.
  • Adjustable disk blade scrapers.
  • Equipped with Timken dual tapered roller bearings.
  • High gang carrier design to prevent trash build up and clogging.
  • Up to 1092lbs (497kg) of weight per disk blade depending on model.
  • Standard 13” (330mm) depth of penetration with 36” (914mm) diameter disk blades.
  • Optional 15” (381mm) depth of penetration with 42” (1.07m) diameter disk blades.


Series TRCW Wheel Offset Disk Harrow

20” (508mm) disk spacing; 2-1/2” (64mm) round axles; Equipped with Timken dual tapered roller bearings.

Model Number Width of Cut ft/in (m) Number of Disks Suggested Engine Horsepower Weight Per Disk lbs (kg) Net Weight lbs (kg)
TRCW‐12 9’‐0” (2.7) 12 240 – 325 1092 (497) 13,105 (5957)
TRCW‐16 12’‐6” (3.8) 16 300 – 400 1009 (459) 16,137 (7335)

*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation.

Standard Equipment

  • 36” (914mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.
  • Adjustable disk blade scrapers.
  • Heat treated alloy steel gang axles.
  • Heavy duty fabricated steel spacer spools.
  • Heavy duty bearing wear plates.
  • New industrial tires – 2 each TRCW-12 and TRCW-16: 15 x 22.5 – 16 ply.
  • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
  • Drawbar jack stand and safety chain.


Optional Equipment

  • 42” (1.07m) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.
  • Cylinder rod stops
  • Oil Bath Bearings