TRCH Series

Hinge Offset Disk Harrow

For use with tractors in the 165 – 340hp range

FEATURES

  • For deep plowing, plowing in heavy trash, mixing and aerating.
  • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.
  • High gang carrier design to prevent trash build up and clogging.
  • Adjustable disk blade scrapers.
  • Equipped with Timken dual tapered roller bearings.
  • Up to 850lbs (386kg) of weight per disk blade depending on model with an average of 775lbs (352kg).
  • Up to 13” (330mm) maximum depth of penetration with standard 36” (914mm) diameter disk blades.
  • Levels, cuts and mixes to full working depth.
TRCHSeries.jpg
TRCHSeries.jpg

Specifications

Series TRCH Hinge Offset Disk Harrow

20” (508mm) disk spacing; 2-1/2” (64mm) round axles; Equipped with Timken dual tapered roller bearings

Model Number Width of Cut ft/in (m) Number of Disks Suggested Engine Horsepower Weight Per Disk lbs (kg) Net Weight lbs (kg)
TRCH-10 7’-6” (2.3) 10 165 – 190 850 (386) 8496 (3854)
TRCH-12 9’-0” (2.7) 12 181 – 206 807 (366) 9680 (4391)
TRCH-16 12’-0” (3.7) 16 241 – 266 789 (358) 12,616 (5723)
TRCH-20 14’-0” (4.3) 20 280 – 304 729 (331) 14,582 (6614)
TRCH-24 18’-6” (5.6) 24 302 – 340 702 (318) 16,838 (7638)

*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation.

Standard Equipment

  • 36” (914mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.
  • Mechanical angling control.
  • Adjustable disk blade scrapers.
  • Heat treated alloy steel gang axles.
  • Heavy duty cast steel spacer spools.
  • Heavy duty bearing wear plates.
  • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
  • Drawbar jack stand and safety chain.

Optional Equipment

  • Cylinder rod stops.
  • Weight box.