TCW Series

Wheel Offset Disk Harrow

For use with tractors in the 30 – 114hp range.

FEATURES:

  • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.
  • High gang carrier design to prevent trash build up and clogging.
  • Levels, cuts, and mixes to full working depth.
  • Combines ease of maneuverability with high strength for the most adverse conditions.
  • Up to 178lbs (81kg) of weight per disk blade depending on model with an average of 171lbs (78kg).
  • Up to 8” (203mm) maximum depth of penetration with standard 24” (610mm) diameter disk blades.
  • Equipped with Timken dual tapered roller bearings.
  • Adjustable disk blade scrapers.
  • Dual purpose transport unit for transportability and penetration control.
TCWSeries.jpg
TCWSeries1.jpg
TCWSeries2.jpg
TCWSeries.jpg
TCWSeries1.jpg
TCWSeries2.jpg

Specifications:

Series TCW Wheel Offset Disk Harrow

9-1/2” (241mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken dual tapered roller bearings

Model Number Width of Cut ft/in (m)  Number of Disks Suggested Engine Horsepower Weight Per Disk lbs (kg) Net Weight lbs (kg)
TCW-16  6’-0” (1.8)  16  30 - 56 175 (79)   2813 (1276)
TCW-18  7’-0” (2.1)  18  32 -57  171 (78)  3082 (1398)
TCW-20  7’-6” (2.3)  20  38 - 65 177 (80)   3557 (1613)
TCW-24  9’-0” (2.7)  24  48 - 73 165 (75)   3982 (1806)
TCW-28  10’-6” (3.2)  28  54 - 87 178 (81)  4984 (2261) 
TCW-32  12’-0” (3.7)  32  73 - 98 174 (79)   5576 (2529)
TCW-36 14’-0” (4.3) 36 77 - 102 164 (74) 5923 (2687)
TCW-40 15’-6” (4.7) 40 89 - 114 166 (75) 6660 (3021)

*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.

NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation.

Standard Equipment:

  • 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) deep concavity disk blades.
  • Adjustable disk blade scrapers.
  • Heat treated alloy steel gang axles.
  • Heavy duty cast steel spacer spools.
  • Heavy duty bearing wear plates.
  • New industrial tires – 2 each. TCW-16 thru TCW-24: 12.5L x 15 – 12 ply. TCW-28 and TCW-32: 7.5 x 16 – 12 ply. TCW-36 and TCW-40: 12.5L x 15 – 12 ply.
  • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
  • Two heavy duty gang wrenches.
  • Drawbar jack stand and safety chain.

Optional Equipment:

  • 26” (660mm) diameter x 1/4” (6mm) thick, cutout (notched) deep concavity disk blades.
  • Cylinder rod stops for positive depth control adjustment.
  • Drawbar clevis for track type tractors