TAW Series

Wheel Offset Disk Harrow

For use with tractors in the 84 – 193hp range

FEATURES

  • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.
  • Dual purpose transport unit for transportability and penetration control.
  • Combines ease of maneuverability with high strength for the most adverse conditions.
  • High gang carrier design to prevent trash build up and clogging.
  • Greaseable dual tapered roller bearings.
  • Levels, cuts, and mixes to full working depth.
  • Up to 384lbs (174kg) of weight per disk blade depending on model with an average of 366lbs (166kg).
  • Full range of adjustments to control depth of penetration – up to 9” (229mm) with standard 28” (711mm) diameter disk blades.
TAWSeries1.jpg
TAWSeries2.jpg
TAWSeries3.jpg
TAWSeries1.jpg
TAWSeries2.jpg
TAWSeries3.jpg

Specifications

Series TAW Wheel Offset Disk Harrow

12” (305mm) disk spacing; 2-1/8” (54mm) round axles; Equipped with Timken dual tapered roller bearings

Model Number Width of Cut ft/in (m) Number of Disks Suggested Engine Horsepower Weight Per Disk lbs (kg) Net Weight lbs (kg)
TAW–16 7’-6” (2.3) 16 84 – 105 379 (172) 6067 (2752)
TAW-20S 9’-6” (2.9) 20 98 – 120 352 (160) 7044 (3195)
TAW-24 11’-6” (3.5) 24 117 – 138 346 (157) 8313 (3771)
TAW-28 13’-6” (4.1) 28 155 – 177 384 (174) 10,748 (4875)
TAW-32 15’-6” (4.7) 32 171 – 193 369 (167) 11,811 (5357)

*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE
S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation.

Standard Equipment

  • 28” (711mm) diameter, 3/8” (10mm) thick, cutout (notched) deep concavity disk blades.
  • Adjustable disk blade scrapers.
  • Heavy duty bearing wear plates.
  • New industrial tires – 2 each. TAW-16 thru TAW-24: 12.5L x 15. TAW-28 and TAW-32: 21.5L x 16.1.
  • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
  • Drawbar jack stand and safety chain.

Optional Equipment

  • 30” (762mm) diameter x 3/8” (10mm) thick, cutout (notched) deep concavity disk blades.
  • 30” (762mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.
  • 32” (813mm) diameter x 3/8” (10mm) thick, cutout (notched) deep concavity disk blades.
  • Cylinder rod stops.