TACW Series

Wheel Offset Disk Harrow

For use with tractors in the 95 – 209hp range

FEATURES

  • For deep plowing, plowing in heavy trash, mixing and aerating.
  • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.
  • High gang carrier design to prevent trash build up and clogging.
  • Combines thorough mixing and aerating with easy maneuverability and transportability.
  • Up to 625lbs (284kg) of weight per disk blade depending on model with an average of 582lbs (264kg).
  • Up to 10” (254mm) maximum depth of penetration with standard 32” (813mm) diameter disk blades.
  • Equipped with Timken dual tapered roller bearings.
  • Adjustable disk blade scrapers.
  • Dual purpose transport unit for transportability and penetration control.
TACWSeries1.jpg
TACWSeries2.jpg
TACWSeries3.jpg
TACWSeries1.jpg
TACWSeries2.jpg
TACWSeries3.jpg

Specifications

Series TACW Wheel Offset Disk Harrow

17-3/4” (450mm) disk spacing; 2-1/8” (54mm) round axles; Equipped with Timken dual tapered roller bearings

Model Number Width of Cut ft/in (m) Number of Disks Suggested Engine Horsepower Weight Per Disk lbs (kg) Net Weight lbs (kg)
TACW-10 6’-6” (2.0) 10 95 – 120 612 (278) 6120 (2776)
TACW-12 8’-0” (2.4) 12 105 – 130 553 (251) 6630 (3007)
TACW-16 11’-0” (3.4) 16 168 – 193 625 (284) 9992 (4532)
TACW-20 14’-0” (4.3) 20 184 – 209 538 (244) 10,755 (4878)

*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation.

Standard Equipment

  • 32” (813mm) diameter x 3/8” (10mm) thick, cutout (notched) deep concavity disk blades.
  • Adjustable disk blade scrapers.
  • Heat treated alloy steel gang axles.
  • Heavy duty cast steel spacer spools.
  • Heavy duty bearing wear plates.
  • New industrial tires – 2 each. TACW-10 thru TACW-16: 12.5L x 15 – 12 ply. TACW-20: 16.5L x 16.1 – 10 ply.
  • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
  • Two heavy duty gang wrenches.
  • Drawbar jack stand and safety chain.

Optional Equipment

  • Cylinder rod stops for positive depth control adjustment