185 Series

Flex Wing Tandem Disk Harrow

For use with tractors in the 200 – 400hp range

FEATURES

  • Mainframe, wings, and gang carriers constructed of tough high strength tubular steel for maximum strength and durability.
  • Weld on gang standards for optimum strength and rigidity assures precise gang alignment.
  • Hydraulically controlled transport assembly and wing fold up.
  • Wing fold mechanism allows wings to float up and down 5° when disk plowing.
  • Equipped with oil bath dual tapered roller bearings.
  • Spring loaded self-leveling hitch with front to rear leveling turnbuckle gives precise leveling control.
  • Fixed gang angle of 18° for both front and rear gangs.
  • Adjustable height on hitch clevis allows for straight line pull and helps prevent gouging of the front gangs.
  • 9” (229mm) ground clearance with 24” (610mm) diameter disk blades.
  • 185lbs (84kg) of harrow weight per disk blade.
185Series.jpg
185Series.jpg

Specifications

Series 185 Flex Wing Tandem Disk Harrow

9” (229mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken oil bath dual tapered roller bearings.

Model Number Number of Disks Number of Bearings Width of Cut ft/in (m) Transport Width ft/in (m) Transport Height ft/in (m) Suggested Engine Hp Net Weight lbs (kg)
185-966 66 16 25’-2” (7.7) 15’-6” (4.7) 9’-9” (3.0) 200 – 285 12,210 (5538)
185-978 78 24 29’-6” (9.0) 15’-6” (4.7) 12’-6” (3.8) 250 – 350 14,430 (6545)
185-982 82 24 31’-0” (9.5) 15’-6” (4.7) 13’-0” (4.0) 265 – 370 15,170 (6881)
185-986 86 24 32’-6” (9.9) 15’-6” (4.7) 13’-6” (4.1) 290 – 400 15,910 (7217)
185-990 90 24 34’-0” (10.4) 15’-6” (4.7) 14’-6” (4.4) 310 – 410 16,650 (7552)
185-994 84 24 35’-6” (10.8) 15’-6” (4.7) 15’-0” (4.6) 400 + 17,390 (7888)

*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. Two rear tractor hydraulic circuits required for harrow operation.

Standard Equipment

  • 24” (610mm) diameter x 1/4” (6mm) thick, smooth (round) shallow concavity disk blades for longer life.
  • Tapered gang assemblies.
  • Disk type balk buster.
  • Adjustable disk blade scrapers.
  • Heat treated alloy steel gang axles.
  • Heavy duty cast steel spacer spools.
  • Bearing wear plates.
  • Cylinder rod stops for positive depth control adjustment.
  • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
  • Wheel hubs have 8-bolt, 6000lb (2722kg) slip in spindles on center frame and wings with two tapered roller bearings on each hub that are dust and moisture protected.
  • Four dual sets of 12Lx15 farm highway service tires on center frames and wings for maximum floatation and tire capacity.
  • Transport locks pin wheels in raised position for transport.
  • Two heavy duty gang wrenches.
  • Drawbar jack stand.

Optional Equipment

  • 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) front and smooth (round) rear shallow concavity disk blades.
  • 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) front and rear shallow concavity disk blades.
  • Rear hitch assembly.
  • Rear hydraulic group.
  • Extra heavy duty bearing wear plates with 1/4” (6mm) hard plate overlay.
  • Light group.