RP SERIES PIVOT DUMP SCRAPERS

Pivot Dump Carry-All Scraper

For use with tractors in the 225 - 300hp range

FEATURES

  • The ROME towed pivot dump, roll-out scrapers are the perfect solution to a wide range of material moving challenges and are ideally suited for moving bulk material at low cost and fast turnaround.
  • Three bowl sizes with two tire arrangements are available to allow these machines to work in both high compaction and extremely soft soil environments.
  • Designed for use in agriculture; general, road, and levee construction; site preparation; pond building; cutting and maintaining irrigation ditches; and land leveling.
  • Ruggedly built with heavy duty plate frame construction electrically welded for maximum strength and rigidity.
  • Designed to allow maximum dump clearance in order to assure maximum control of discharged material.
  • One piece bowl reduces load compaction and greatly increases efficiency.
  • Bolt on frost bit/stinger standard.
  • All wheel hubs are fully independent.
  • Tandem hitch capability with hydraulic supply kit and auxiliary kit standard.
  • Bulkhead fittings protect hydraulic hookups.

 

RP_PivotDumper1.jpg
RP_PivotDumper2.jpg
RP_PivotDumper1.jpg
RP_PivotDumper2.jpg

Specifications

Series RP Pivot Dump Carrry-All Scraper

 

Model Number  Capacity Width of Cut ft/in (m)  Overall Length ft/in (m)  Overall Length ft/in (m)  Number of Tires & Ply  Suggested Engine Hp Net Weight lbs (kg) 
Heaped
yd³ (m³)
Struck
yd³ (m³)
Single Tandem
RP-150CS
Contractors Special
15 (11.5) 11 (8.4) 10’-0” (3.1) 25’-0” (7.6) 11’-11” (3.6) (4) 20.5x20 20 PR 225 300 19,150 (8686)
RP-150LGP
Low Ground Pressure
5 (11.5) 11 (8.4) 10’-0” (3.1) 25’-8” (7.8) 11’-11” (3.6) (2) 66x43 25 NHS 225 n/a 18,675 (8471)
RP-175CS
Contractors Special
17.5 (13.4) 13.5 (10.3) 10’-0” (3.1) 25’-0” (7.6) 11’-11” (3.6) (4) 20.5x25 20 PR 300 450 19,575 (8879)
RP-175LGP
Low Ground Pressure
17.5 (13.4) 13.5 (10.3) 10’-0” (3.1) 25’8” (7.8) 11’-11” (3.6) (2) 66x43 25 NHS 300 n/a 19,105 (8666)
RP-180CS
Contractors Special
18 (13.8) 14 (10.7) 12’-0” (3.7) 25’-0” (7.6) 13’-11” (4.2) (4) 20.5x25 20 PR 300 450 20,635 (9360)

 

*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to scraper.
NOTE: This scraper requires hydraulic control. Two rear tractor hydraulic circuits required for scraper operation.