RP-212HDE EARTHMOVING SCRAPER
Heavy Duty Ejector Scraper
For use with tractors in the 375 - 600 hp range
- Rugged 23 yd³ (17.6m³) scraper with heavy duty plate frame construction for maximum strength and rigidity.
- Rear cross member made from 10” (254mm) x 10” (254mm) x 3/4” (20mm) thick fabricated box section steel.
- Spreader bar made from 14” (357mm) x 14” (357mm) x 3/4” (20mm) thick fabricated box section steel.
- 3-1/2” (89mm) thick floor protects against pan deflection from heavy material loads and floor wear from abrasion.
- Tandem hitch capability.
- “Slip-in” bolted spindle and hub assembly.
- Highest quality hydraulic cylinders have ball joints on both base and rod ends for long life.
- Push block protects scraper rear when push loading is necessary in tough loading conditions.
- Main cutting edge is a multi-piece design making it easy to change a single section of the blade.
- Ejector is supported with six rollers that are built with wheel hub style components for easy maintenance and maximum life.
Series RP-212HDE Heavy Duty Ejector Scraper
|Width of Cut||12’‐6” (3.8m)|
|Struck Capacity||18yd³ (13.8m|
|Heaped Capacity||23yd³ (17.6m³)|
|Payload Heaped Capacity||58,590 (26,576kg)|
|Overall Dimensions||Length||29’‐9” (9.1m)|
|Bowl Dimensions||Height||4’‐2” (1.3m)|
|Depth of Spread||20” (0.5m)|
|Depth of Cut||5” (127mm)|
|Width Outside to Outside of Tires||12’‐6” (3.8m)|
|Transport Clearance||18” (457mm)|
|Shipping Weight||29,157 (13,225kg)|
|Scraper Weight Distribution||Tongue||21%|
|Number of Tires||2|
|Tire Size||29.5 x 25|
|Floor Thickness||3‐1/2” (89mm)|
|Reversible Cutting Edges||Yes|
|Tandem Kit Available||Yes|
|Special Tractor Drawbar||Required|
|Suggested Engine Horsepower||375 – 600|
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to scraper.
NOTE: This scraper requires hydraulic control. Two rear tractor hydraulic circuits required for scraper operation.