RALSE Series

Finishing Ejector Scraper

For use with tractors in the 200 – 300hp range

FEATURES

  • Computer aided design increases efficiency and performance.
  • Designed for agricultural earthmoving; land forming; and precision laser/GPS leveling.
  • Optisurface compatible.
  • Excellent tool for farm leveling.
  • Smooth and maintain access roads.
  • Build stock ponds.
  • Rework washed out terraces.
  • Rigid welded box beam construction withstands the toughest operating conditions and assures the highest degree of leveling accuracy.
  • Dual purpose hydraulics controls the transport unit and the depth of cut.
  • Hydraulics adapt for laser/GPS control.
  • Walking beam axle provides stability to scraper when operating at higher speeds.
RALSE_Scraper1.jpg
RALSE_Scraper2.jpg
RALSE_Scraper1.jpg
RALSE_Scraper2.jpg

Specifications

Series RALSE Finishing Ejector Scraper

 

Model Number RALSE‐14 RALSE‐16
Capacity: yd³ (m³)  12 (9.2)  14 (10.7)
Overall Dimensions Length: ft/in (m)  19’‐0” (5.8)  19’‐0” (5.8)
Width: ft/in (m)  15’‐4” (4.7)  17’‐4” (5.3)
Height: ft/in (m)  9’‐3” (2.8)  9’‐3” (2.8)
 Bucket Dimensions   Length: ft/in (m)  4’‐7” (1.4)  4’‐7” (1.4)
Width: ft/in (m) 14’‐0” (4.3)  16’‐0” (4.9)
 Height: ft/in (m) 3’‐9” (1.1)  3’‐9” (1.1)
 Transport Clearance: in (mm)   16” (406)  16” (406)
 Net Weight: lbs (kg)   14,115 (6416)  15,074 (6852)
 Payload Weight @ 2250 lb/yd³: lbs (kg)   27,000 (12,247)  36,000 (16,330)
 Number of Tires and Size  (4) ‐ 16.5 x 16.1  (4) ‐ 16.5 x 16.1
 Number of Rims and Size  (4) ‐ 11 x 16.1  (4) ‐ 11 x 16.1
 Width of Cut: ft/in (m)  14’‐0” (4.3)  16’‐0” (4.9)
Suggested Engine Horsepower 200 – 250 250 – 300
Number of Blades and Size: ft/in (m) (2) ‐ 7’‐0” (2.1) Reversible (2) ‐ 8’‐0” (2.4) Reversible
Hydraulic Cylinders 180 – 230 250 – 300
Hydraulics Required (2) Double Acting Circuits: 15 GPM @ 2000 PSI
Type of Drawbar ROME Special Tractor Drawbar
Type of Hitch Heavy Duty
Loading Method Direct

*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to scraper.
NOTE: This scraper requires hydraulic control. Two rear tractor hydraulic circuits required for scraper operation.