RAFS-EP Series

Bottomless Finishing Scraper

For use with tractors in the 250 – 450hp range


  • Capable of utilizing a single or dual mast machine control system.
  • Excellent for all leveling applications.
  • Smooth and maintain access roads or haul roads.
  • Rework washed out terraces.
  • Up to 3” (102mm) cutting depth.
  • Hydraulically controlled end pull drawbar.
  • End pull transport system reduces transport width to 13’-8” (4.2m)
  • Reversible and replaceable side cutter blades.
  • Offset walking beam transport unit provides stability at higher operating speeds.
  • Rear operating axle can be split to walk contours.


Series RAFS-EP Bottomless Finishing Scraper

Model Number Capacity yd³ (m³) Overall Dimensions Suggested Engine Hp Net Weight lbs (kg)
Length ft/in (m) Width ft/in (m) Height ft/in (m) 4 Mph 6 Mph
RAFS‐20EP 11.9 (8.4) 26’‐4” (8.0) 20’‐0” (6.1) 7’‐8” (2.4) 200 250 14,935 (6774)
RAFS‐24EP 14.3 (11) 30’‐4” (9.2) 24’‐0” (7.3) 7’‐8” (2.4) 250 300 15,835 (7198)

 * Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to scraper.
NOTE: This scraper requires hydraulic control. One rear tractor hydraulic circuits required for scraper operation.

Standard Equipment

  • Hydraulically controlled end pull drawbar.
  • Laser or GPS receiver platforms.
  • Breakaway front tongue.
  • Four 21.5 x 16.1 tires on the operating transport, and two tires on the end pull transport.
  • Adjustable front hitch clevis height.
  • Reversible and replaceable cutting edges and side cutter blades.
  • Drawbar jack and safety chain.

Optional Equipment

  • Laser valve group (without laser).
  • Light group.